Took it out of the garage today..

I needed to get the camper moved over about a foot so that I had clearance to finish the curb side paint job. (Big beam in the garage was right up against the roofs edge)

I hitched it up and VERY carefully pulled it out praying I wouldn't scuff one of the sides.. it is a tight fit.

While it was out I snapped a few pictures to show how the $50 paint job is coming out. I think it's looking great. (you have to imagine it with the door and some chrome baby moon hubcaps)

Before:

After:

Notice the wings?  They are the black ones that came on the little 1400 I bought a couple months ago and sold a week later. They were pretty dingy (and spray-painted black for that matter) so I cleaned them up, sprayed them with bright aluminium and pinstriped them with 1/8 inch bright red automotive striping..

Still trying to decide if they look good with the red accent, or if they just look tacky~ I kinda like them so far.

Here's how they look a little closer and from the 'other side' ~

I hope to get the paint finished up this week.. I need to get going on the 2 roof vents that will be removed and sealed up tight. The remaining vent will get a Fan-Tastic fan, then once thats all sealed I can paint the roof white as well. Not that anyone would notie it, but having it bright white will hopefully reflect heat better than the darkened surface that is up there now.

That's all for now~

A video demo...

I had quite a few people tell me they enjoyed the Kreg Jig demo video I did this winter and that it was helpful so I decided to make another one demonstrating how I'm painting the camper for under $50 dollars.

After I made the video I touched up my Shasta emblem with a red paint pen and installed that too..

Thats it for today..
Its over 90 degrees in the garage and the AC in the house here feels REAL nice right now~

Picking away..

Had another good week of getting things done on the camper..

Last update I mentioned some changes to the color scheme. After trying to find (the now discontinued) retro laminate we wanted and being shocked by the price, we gave some thought to going with a less expensive route. We'll be using materials that are a little easier to find, and easier on the pocket book, so white with red accents it is~  :)

Even the Ford green I wanted to use for the accent color is almost $20 dollars for a 12 oz. spray can. The Rustoluem red comes in 16 oz cans for $3.87 at WalMart.. same thing for the gloss white I'm using on the main body panels. Using less expensive materials will certainly help to get the camper finished this summer.

Here's what I've done since the last update:

Painted the rest of the front
Painted the rest of the rear
Painted the rest of the red accents
Painted and installed the wheels
Painted half the curb side body
Painted the main entry door
Painted the rear bumper
Painted the door stopper
Installed the rear cargo door
Installed front and rear running lights
Refurbished and installed the tail lights
Installed the rock guard mount
Installed the rear window
Installed a repro Shasta decal (in red)

Here's the latest batch of pictures~

-The tail lights all cleaned up and ready for installation.

-This is the off white butyl tape I bought in bulk.. 480 feet for $34 dollars. Easy to work with.

-The rear paint is done in this picture..

-I taped off and saved the vintage 'Good Sam Club' sticker, I like it~!

-Here's the rear window installed and you can see the wiring coming in from the LED running lights.

-Here are the original wheels painted in red. I painted them without removing the tires by coating the rubber and valve stem with dishwashing detergent prior to painting. Once the paint was dry I just sprayed off the detergent which rinsed away easily taking the overspray with it. The right tire below is still drying in this picture. I'll be adding chrome 'baby moon' caps and trim rings to them to complete the look.

-Front end is all painted, Rock guard mount installed, and the running lights are in.

-What a difference the paint is making. Less than $50 for paint and supplies, easily the best "Bang for the buck"

-Found reproduction Shasta decals on ebay. Great quality, love how it looks in red.

-Here's our garage where I'm doing all this, I'm thankful to have a covered place to do the work.

The other camper in the above picture is the 1968 Airflyte we started with in December.
Its on Craigslist right now as I've used everything I could off it and it is time to let it go.

Here's a recap of what the 68 donated to the 71's refurb project:

2 new tires
2 new propane tanks and regulator
4 new stabalizing jacks
2 tail light backing plates
Rear cargo door and drip brow
Rock guard
Sink cover
Wheel bearings still new in box

I also sold a few things off it to raise funds for the 71

Shasta emblem
Airflyte emblem
Assembly plant tag
Grab handle
L-66 entry latch (broken)
Sink vent

Those things brought $177.83 on ebay after fees etc.
Hopefully the 68 will sell quickly and someone will get some use out of it.

That's it for now.. hope to paint more white today~

You'd better sit down...

Sitting? Good. I didn't want to alarm anyone with this shocking news...
I actually did some work on the camper this week  :)

Between the never ending illness that wiped out our family a few weeks ago, and the need for spring cleanup around the yard, the camper took a back seat to all else for the better part of a month and a half.

Since the last update on April 3rd, a few things have happened that relate to the camper.
First, I sold the little Shasta 1400 I picked up. I kept the wings and a couple vent covers I needed and sold a few of the interior light fixtures. After selling that one for $160 dollars I broke even in the end but have the wings now for ours and technically didn't have to pay for them.

Lets see..  I also swapped baggage doors between the 71 and the 68 as the one that was on the 71 was just a wreck. (The door from the 68 isn't a whole lot better but at least it closes tight and the handle isn't about to fall off).

I also converted all the running lights over to LED. I removed the wiring and metal bits from each housing and drilled a 3/8 hole to mount the "pre-wired for 12 volts" 4 chip super bright LEDs in there. Everything came out good, can't wait to see how they look lit up on the trailer.

I use this site for my LED needs, they ship fast and have great customer service..
http://www.oznium.com/

Here's a picture of the LED mounting~

I had ordered 5 new amber lenses back in December as the ones on the camper where sun baked to clear. They are a perfect match to the original ones and will look right at home once I get them in place.

Here's a shot of the wings.. no longer 'Earnhardt black', they now sport a nice bright aluminum finish. Also in this picture is the Shasta magazine rack I got from a Shastaforum member.. I couldn't resist  :)

And finally, today I actually painted a little bit of the rear end. I used a high tech paint booth (large sheets of cardboard leaning up against the workbench to protect from overspray) and just did a small section to see how it would come out. I was talking to my wife on the phone while she was at work this afternoon and I mentioned I had painted a little bit of the camper... She paused and said "With what?" I answered "With spray paint". Her response was something like "Isn't that a little bit ghetto"? I assured her it looked fine.. When faced with the decision to have a body shop paint the trailer for $1000 dollars, or spray it yourself for $50 dollars, the latter wins every time with me :)  She thought maybe rolling it on would be better but I'm happy with the way the spraying is coming out.

I used Rustoleum Gloss White and it's covering nicely with no runs. Won't look 'professionally done' but it will certainly look WAY better than not painting at all~

Here's what I did~

The hardest part was removing the sticky black goop that someone used to reseal the baggage door area.. Good grief, what a pain in the neck that was. Mineral spirits did a good job of removing what I couldn't with a variety of scrapers.

Well thats it for this update.. We've made a few changes to the color schemes and next update should include some news on that~

A month away...

From the trailer that is~

March was somewhat tough and I really didn't get anything done on the trailer at all.
I did manage to purchase some insulation, but nothing has actually progressed in the trailer since the last update on Feb 25th.

At the end of February my work announced layoffs coming for 60 of the 358 people in my group.
We would find out the third week of March who was getting the cut.. It was not to be based on seniority (I have 12+ years in) but rather "the best fit for the group going forward".

I was hesitant to spend any money on the camper with that uncertainty hanging over our heads. Well in the end God was gracious and I was not one of the people that were cut. So that burden was lifted but the last 2 weeks have been spent with sick kids and sick selves.. We made it all winter without major illness but the last couple weeks have been fevers, sore throats, stuffy heads etc.

Yesterday we did take trip up to Chichester NH to see a cheap camper for sale..
Listed and registered as a '68 Scotty', what we found was a 66/67 Shasta 1500 that still had the wings on. For $200 how could we not bring it home? :)

We have no intention of fixing this one.. I'm taking the wings, the drip rails above the windows, emblems, lights, and rock guard. Maybe a couple other things.. My goal is to get the stuff I want off Monday and have it resold by Saturday.

Here it is :

Yes, thats snow on the ground.. April Fools Day storm left 6 inches of heavy wet slush/snow on us. It melted down to what you see above in less than 48 hours.. and today it gone completely~ Goodbye Winter~!

Hope to get back to the Airflyte this week now that I know I'm still employed..
LOTS to do if we are actually going to camp this year :)

Subfloor is nailed down..

Only had 1 afternoon to spend on the camper this week.

All I managed to get done in the last 7 days was to get the subfloor in place and nailed down.
Thankfully I have an air nailer so the whole process took only 30 minutes.
I think I used about 800 nails.. should be enough :)

Got a lot done this week..

I was able to spend some time on the camper this week and just about finished up the framework that needed attention. I replaced the rotted wood and sured up the other areas that needed it. It almost doesn't seem possible but I used 300 of the Kreg screws so far. There is a huge difference in how stiff the frame is now.

I had 2 areas that were a little weak I couldn't get to from inside the trailer. Under the door and just in front of the port side wheel well. Both of those spots had pulled out away from the frame a little bit and the trim that caps the aluminium skin down low had pulled out of the wood. I replaced some wood there, removed all the old nasty screws and replaced them with new ones and was able to get both sides solidly attached again.

On the inside I had an idea about how to clean up the leftover paneling that was stuck between the top frame rail and the aluminum trim channels. I had removed most of the old wood by using a utility knife but I wanted to be able to slide the birch up in behind that trim so it really needed to be cleaned out better. My grinder has a 1/4" thick wheel on it and by running it up behind the trim and slowly working my way around the camper I was able to completely remove all the leftover wood. The new stuff will slide right up in there without issue now so thats good.

At this point I'm ready to put the subfloor down. I already placed in the front piece to see how it looks and fits..no problems there. I took the little circular plate and gromet out of the floor that the wiring harness goes through so I can reuse them once the new floor is down. I should have the subfloor done in the next day or two.

Here's a few more pictures of the gutted interior with 99% of the reframing completed. I added a couple more crossmembers to the front wall and added a few 'gusset' type pieces to areas that were not rebuilt but needed a little more strength.

So now I am left with a clean slate to start rebuilding from.. Took a few weeks longer than I would have liked to get to this point, but I'm glad the demo and wood repairs are done.

The next step for me is to finalize the floorplan and figure out where I'm going to run wiring for 110 and 12 volts. I need to run those things prior to putting in the new insulation.. Still so much to do~